Changing the bolts in the old CRAGAR SUPER TRICK WHEELS
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Sep 2007
Posts: 4,137
Changing the bolts in the old CRAGAR SUPER TRICK WHEELS
OK I know most know the wheels I mean...They used to be all over the place.Well since I have my new wheels I have a set of the old school CRAGARS I was going to throw on eBay.The bolts in them are rusty and look ugly so I was thinking of putting new bolts in them to make them look better. I actually bought some SS bolts for them a long time ago when they were on my car but was afraid to change them.I don't know if it can/would screw up the wheel if I remove them and put in new...Has anyone ever done this? Is there anything I should be aware of if I do. I don't want to sell them to someone and have them wobble or anything like that. Here is a pic of the wheels type. These aren't mine but my wheels are identical. I have the skinnies and I have 14 inch wide ones.
#2
I REPLACED THE ONES ON MY SET WITH NEW STAINLESS STEEL ONES---I JUST DID ONE AT A TIME /SKIPPING A COUPLE AT A TIME TILL I MADE IT ALL AROUND --JUST TAKE YOUR TIME AND FIND THE TORQUE SPECS FOR THEM
GOOD LUCK
LIVELY
GOOD LUCK
LIVELY
#4
I found this website. I dont know if it will help you on the torque of it or not. I couldnt fully open the page as for pics. I am gonna still look to see if i can find something.
http://www.wheelspecs.com/Cragar-Cra...-D_wm1639.aspx
http://www.wheelspecs.com/Cragar-Cra...-D_wm1639.aspx
#5
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Sep 2007
Posts: 4,137
#6
Not Wheel's again :!: :!: :lol: :lol: :lol:
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312
#8
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312