602 chevy crate timing
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jan 2009
Posts: 3
602 chevy crate timing
:?: What is the best timing to run in a 602 crate, GM says 32 deg. max, but I know guys running 38 deg. with good results.....I heard 40 plus will burn the pistons......any help is appreicated.
#2
Senior Member
EXPERT BUILDER
Join Date: Jan 2005
Posts: 336
take er to the track experiment and see what gives you best mph...but off hand quick answer is cylinder pressure will dictate where u can go.if its ten to one compression then perhaps 35-38 all in timing is ball park.where as same identical motors but bump up compression to 13:1 then max might only be 33 because with more compression you dont need more advance.same goes with nitrous hence retarding motor on the spray