Results 1 to 2 of 2

Thread: solid roller cam specs for 509 whippled/cooled

  1. #1

    solid roller cam specs for 509 whippled/cooled

    going through the motor in my 25' ultimate warlock sxt cat, stock 502,
    hyd. roller (stock) w/ a whipplecharger/whipplecooler setup making 6lbs
    of boost. never set up a motor for an outdrive , and I know I'll only need
    to rev it maybe 5500-5800rpm. new comp ratio will be about 7.9/8.0to1
    had 8.75to 1. should I stick to around 230/[email protected] on a 112 or 114?
    or should I, could I go bigger? the bravo 1 IS the weak link in this setup!

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Belleville, IL
    Leave the cam alone and crank up the boost. 6 PSI is nothing, and it'll be even less with the compression loss.

    With an inter cooled Whipple, you can throw a TON of boost at it.
    -WJ Birmingham

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy