'69 Camaro Mono leaf rear with Multi Leaf springs
07-16-2009, 02:44 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Apr 2009
Posts: 6
'69 Camaro Mono leaf rear with Multi Leaf springs
'69 Camaro Mono leaf rear with Multi Leaf springs
Will it work and what modifications will be needed?
Thank you
07-16-2009, 03:46 PM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Should bolt right up. As I recall, the spring perches on the early Camaro's weren't flat. They were cupped around the sides of the spring. I'm pretty sure the multileaf perches were deeper, so you may need to use u-bolts on both sides instead of the t-bolts that were stock on the front side of the axle. Also the rear shocks are longer with the multileaf setup.....
07-17-2009, 06:36 AM
Senior Member
RACING JUNKIE
Join Date: Dec 2008
Location: Sugar Hill, GA
Posts: 1,365
The rubber pad that goes between the spring and perch are different. You will have to modify them with a razorblade.
Dave
07-17-2009, 04:41 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Apr 2009
Posts: 6
thanks
thanks to all
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off