Results 1 to 5 of 5

Thread: 9" dirt track rear

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Oct 2006
    Location
    Elizabeth WV.
    Posts
    9

    9" dirt track rear

    Hey guys... I'm running a 9" ford on the dirt...Have Superior axels in it.. Keep breaking the left rear... the housing is straight.. it breaks right on the outside of the bearing the car weighs 3200 around 500hp...they are 31 spline. any ideas on what to do here... what axels are the best out there.. Need help on axel number 5 !!!!


    Scott
    " I WANNA GO FAST "

  2. #2
    are you using harden axels if so then try moser axels

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Dec 2004
    Location
    austin texas
    Posts
    729
    Does the bearing still turn freely after the axle has broken off? Can you get us a pic?

  4. #4
    Junior Member SHOW GUEST
    Join Date
    Oct 2006
    Location
    Elizabeth WV.
    Posts
    9
    yes the bearing is fine... I have always put a new one in it but sure you could use the old bearing again.
    " I WANNA GO FAST "

  5. #5
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2009
    Posts
    510
    Sounds like someone doesn't like you and keeps hitting that corner of the car, haha.


    I would try Mosers also. Price is good and quality if great.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy