Having problems this weekend with turning over a hot motor, we ended up chewing up the teeth on our flywheel. What is the strongest starter/ flywheel combo out there? I have a B&M flex in this car (same in our old car) and the flywheel just didn't seem to last. I put in a billet CSR flywheel in our old car(before we sold the car) that seemed to work well.
Having problems this weekend with turning over a hot motor, we ended up chewing up the teeth on our flywheel. What is the strongest starter/ flywheel combo out there? I have a B&M flex in this car (same in our old car) and the flywheel just didn't seem to last. I put in a billet CSR flywheel in our old car(before we sold the car) that seemed to work well.
I went through a bunch of them high dollar and non-high dollar, there is usually a reason it chews up flexplates not a cheap flexplate issue.
Do you have a start retard or does the voltage drop off a lot when cranking ?
Another guy asked me about the start retard (I don't have one) but I never thought about the volt drop. I better check the size of wire to the starter and volts during cranking- Thanks!
Are you running a Ford solenoid in the starter system? If not, it may be a good investment. It allows more current to flow to the starter. Just a suggestion.
Another guy asked me about the start retard (I don't have one) but I never thought about the volt drop. I better check the size of wire to the starter and volts during cranking- Thanks!
I went through this last year, before testing everything and finding a voltage issue wasnt helping matters.
I USED TO GO THROUGH THOSE MINI STARTERS LIKE CRAZY , THEN I RELIZED I HAD A START RETARD BUILT INTO MY 7AL3 , I HOOKED IT UP AND HAVN'T HAD A PROBLEM SINCE...PAUL
I USED TO GO THROUGH THOSE MINI STARTERS LIKE CRAZY , THEN I RELIZED I HAD A START RETARD BUILT INTO MY 7AL3 , I HOOKED IT UP AND HAVN'T HAD A PROBLEM SINCE...PAUL
very suprising, being the al3 has 25degrees start timing pulled out usually causes tons of issues instead of helps.
Maybe they get more time to cool down. Mine will start better cold with the start retard but will kick back when its hot. Since I start more after its warmed up I don't run mine.