Valve Adj Help Needed
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: May 2009
Posts: 18
Valve Adj Help Needed
I have a SBC with a Crane roller cam #118411 (jegs) , track 1 heads , SRP 12:9/1 pistons and I need to adjust the valves but I can't find any specs . This motor has never been fired and PO thinks the adjustment should be 12int/18exh . I need some ideas
#3
Originally Posted by wmeabates
.012 in .022 ex with 1.5 rockers,add .001 lash for each .1 added rocker ratio-1,6 .013 in .023 ex.Use .018 ex for continuous high rpm,like round track.Bill.
Just my experience.
Dave
#4
Senior Member
MASTER BUILDER
Join Date: Sep 2005
Posts: 134
Hi dave,This cam has a fast in. ramp,.012 lash 290 [email protected] 260 [email protected] .670 [email protected] ,the ex lobe is slower with [email protected]@.050 and only [email protected] like 2 differnt cams.I've had that same came for 20 yrs now and used it in 2 differnt motors,worked real well both times.I don't know how long Crane was making it before I got it but they were still making it untill they closed,same part# same grind#. Bill.
#5
Bill, That makes sence now. Like picking seperate profiles from the CompCam book (one of my favorite reading materials).
Dave
P.S. I Hear S&S will soon be hiring in Florida again. Good news for a great name brand.
Dave
P.S. I Hear S&S will soon be hiring in Florida again. Good news for a great name brand.