HELP-Closed chambered heads and using Open chambrd pistons

Old 06-03-2009, 04:27 PM
  #1  
jackbn
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2005
Posts: 13
Default HELP-Closed chambered heads and using Open chambrd pistons

Got a set of closed chambered BBC rect 291's that have been opened up (measure at 109CC) and I've got a new set of Speed Pro (TRW) L2308AF30's that I would like to use. It's a pro-street car so I would like to try to stay below 12 to 1 CR. Does anyone know where to cut and/or how to take some of the dome off ??
jackbn is offline  
Old 06-03-2009, 05:06 PM
  #2  
signsbyesa
Senior Member
RACING JUNKIE
 
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
Default

you need a "mill" and wiegh each one for balance, i took mine to
a machine shop and they did a good job, w/closed chamber heads,
flat tops work well, are you going to run racing fuel on the street
if you run 12: to 1, does your cam match the compression?
:wink: good luck
signsbyesa is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -