HP Guess

Old 05-16-2009, 03:12 PM
  #1  
heshtesh
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 45
Default HP Guess

This is the engine i'm running in my 89 1/2 ton two wheel drive this summer i'd like to get some guesses on HP before it hits the dyno next week. The truck is in getting a three link installed along with a 9" ford rear should be done next week.

358ci
Scat 4340 43lbs crank
eagle 6" H beam rods
JE 12.1 to 1 pistons
Reed solid roller 262/267 @50 618/625 lift 106 split
Brodix alum 11x heads fully ported polished,bench flowed should be approx 240cc on intake side i don't have flow sheet yet
jessel ss rocker system 1.5 ratio
Mass flow fuel injection with 45lb injectors

My guess a solid 550HP
heshtesh is offline  
Old 05-16-2009, 04:09 PM
  #2  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

I think you are pretty close...1.5 hp per cube is 537
Tod74 is offline  
Old 05-16-2009, 04:29 PM
  #3  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,523
Default HP

I'd guess around 550.
fla1976 is offline  
Old 05-16-2009, 04:33 PM
  #4  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

I would say a Briggs & stratton has more :!: :!:


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312
mopar1968 is offline  
Old 05-16-2009, 04:35 PM
  #5  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

MOPAR must have lost to a Chevy recently..... :lol:
Tod74 is offline  
Old 05-16-2009, 04:54 PM
  #6  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

Nah thier not quick enough, get up to the light's and still have to give at least 2 lights, then feather the throttle so when i pass them it doesn't look so bad on them at the end.


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312
mopar1968 is offline  
Old 05-16-2009, 04:59 PM
  #7  
MEMRACING62
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
Default

OH BROTHER ITS GETTING DEEP AROUND HERE, TIME TO PUT ON THE HIP BOOTS :!: :lol: :lol: :lol:
MEMRACING62 is offline  
Old 05-17-2009, 08:06 AM
  #8  
heshtesh
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 45
Default Mopar 1968

Just wondering are you going to have to kiss up on Obama to by parts for that Mopar from GOVERNMENT MOTORS?
heshtesh is offline  
Old 05-17-2009, 08:09 AM
  #9  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

Nope i work at a dealership so i can get all the MOPAR parts i want, check my profile, and the parts doesn't cost me a penny :!: :!: I don't kiss anyone's a$$ for anything :!: :!: Now see that's is what i don't understand about idiots like you, you really don't understand what is going on with the auto industry but you come on here with 3 post under your belt and start calling it goverment motor's, Please the next time you start to shoot off your mouth about something you have no idea about, DON'T :!: :!: And by the way GM is in alot worse shape them chrysler is, chrysler closed 700 dealerships, GM is closing close to 1200 :!: :!: enough said :!: :!:


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312
mopar1968 is offline  
Old 05-17-2009, 09:10 AM
  #10  
heshtesh
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 45
Default Relax

Mopar1968: I would have thought you had a sense of humor when you posted ( I would say a Briggs & Stratton has more ) as i took it in good humor. When i made my comment it was meant in good humor but you appear to lack the maturity to recognize it for what it was. As for you having 912 post and myself only 3 it only took to reading the third post from you to realize that i won't bother to read another. Go ahead and rant i won't waste my time as i see your opinions as irrellavent.
heshtesh is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -