engine pops back thru the exhaust
05-16-2009, 08:11 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Feb 2007
Posts: 16
engine pops back thru the exhaust
460 ford installed new cam lifters and springs(hydraulic) new wiand plugs< what can it be
05-16-2009, 08:13 AM
Senior Member
RACING JUNKIE
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
More info, when does it do this, street car, race car :?: :?:
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312
05-16-2009, 08:52 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Feb 2007
Posts: 16
05-16-2009, 09:38 AM
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Valve staying open or closed.....
05-16-2009, 11:02 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Sounds like ya have a valve or two too tight to me! JMO
TS1955
05-16-2009, 11:36 AM
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Sometimes it takes a little while for the lifters to pump up. Make sure you recheck the lash after you run the engine a little while. If there pumped up you should have oil coming off all the rockers.
05-16-2009, 12:30 PM
Senior Member
RACING JUNKIE
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Yeah i would have to agree, back the lash off a bit and see what happens :!: :!:
''JUST MY TWO CENT'S WORTH''
http://www.racingjunk.com/profile/163312
05-17-2009, 07:41 PM
Senior Member
SENIOR BUILDER
Join Date: Apr 2009
Location: odessa texas
Posts: 103
maybe u didnt degree ur cam right????
05-18-2009, 03:04 PM
Member
JUNIOR BUILDER
Join Date: Aug 2007
Location: Odessa Texas
Posts: 81
Your popping through the exhaust because the vavle lash is too tight on the exhaust valves or lobes going flat on the camshaft.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off