Results 1 to 8 of 8

Thread: Rupert Lean out valve

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Feb 2008
    Location
    New Jersey
    Posts
    133

    Rupert Lean out valve

    I see many people have this "dial" like lean out valve made by Rupert using vacume.
    Where can i get one? Looks like Rupert doesnt have a website.

    Thanks
    Keith

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998

    Re: Rupert Lean out valve

    Quote Originally Posted by dynaguy03
    I see many people have this "dial" like lean out valve made by Rupert using vacume.
    Where can i get one? Looks like Rupert doesnt have a website.

    Thanks
    Keith
    Not sure what the dial one is, but before he used to just send a normal lean out valve you could get from mcmaster carr
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Feb 2008
    Location
    New Jersey
    Posts
    133

    lean out valve

    Thanks David... do you know what they might call such a thing in this massive McMaster -Carr catalog "Abyss"..lol

  4. #4
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    Keith,

    Go to this page

    http://www.mcmaster.com/#catalog/115/455/=1mnr5p

    Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.

    Curtis

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by doorracer
    Keith,

    Go to this page

    http://www.mcmaster.com/#catalog/115/455/=1mnr5p

    Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.

    Curtis

    Thats it, I used it when I ran rupert stuff.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  6. #6
    Senior Member MASTER BUILDER
    Join Date
    Feb 2008
    Location
    New Jersey
    Posts
    133
    Curtis /David

    Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
    Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950

    THANKS AGAIN
    Keith

  7. #7
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    Keith,
    Which part number did you get exactly? The one I ordered was black, most that I have seen were red. Just wondering. Thanks.

    Curtis

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by dynaguy03
    Curtis /David

    Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
    Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950

    THANKS AGAIN
    Keith
    they are much cheaper then the carb places sell them for
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy