where do i install the high speed bypass
04-16-2009, 01:19 AM
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
where do i install the high speed bypass
where do i intall a high speed bypass into my block style metering valve birdcatcher. could someone show me photos or have a really good explanation???
THanks
THanks
04-16-2009, 04:21 AM
#2
Senior Member
DYNO OPERATOR
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
On a birdcatcher style injection there is a fuel line that goes from your barrel valve to the distribution block. The by-pass goes in that fuel line just off of the barrel valve. Hope this helps.
TS1955
TS1955
04-16-2009, 08:01 AM
#3
Senior Member
MASTER BUILDER
Join Date: Mar 2003
Posts: 127
Here is the link to a drawing I have used. As stated above it can go between the meter valve and the distribution block in the drawing
hope this helps
http://goodvibesracing.com/Technical...ions_BG-TR.pdf
hope this helps
http://goodvibesracing.com/Technical...ions_BG-TR.pdf
