Results 1 to 2 of 2

Thread: MANUAL BRAKES,HELP!!

  1. #1
    Senior Member DYNO OPERATOR
    Join Date
    Apr 2008
    Posts
    496

    MANUAL BRAKES,HELP!!

    I HAVE A MP BRAKES CONVERSION FOR MY 86 MONTE CARLO WHEN I PUT THE MASTER CYLINDER ON THE CAR THE PUSH ROD THAT COMES WITH THE KIT IS 1/8 INCH OFF CENTER, IM USEING THE TOP HOLE ON THE BRAKE PEDAL.WHAT SHOULD I DO TO SOLVE THIS PROBLEM.

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Dec 2004
    Location
    out of my mind in Kalamazoo, MI
    Posts
    179

    Re: MANUAL BRAKES,HELP!!

    Quote Originally Posted by JEFF69Z28
    I HAVE A MP BRAKES CONVERSION FOR MY 86 MONTE CARLO WHEN I PUT THE MASTER CYLINDER ON THE CAR THE PUSH ROD THAT COMES WITH THE KIT IS 1/8 INCH OFF CENTER, IM USEING THE TOP HOLE ON THE BRAKE PEDAL.WHAT SHOULD I DO TO SOLVE THIS PROBLEM.
    Are you converting from the original set up of power brakes to the MP set up?....does it have a booster?...1/8 inch off center is a bunch...make sure the rod is not bent...put it on a flat surface and roll it...does it wobble? then it is probably bent...call MP tech line tell them what your problem is they should be able to help you or find a new one...

  3. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy