355 sbc
#2
depends on if you are going to overdrive or underdrive the pulleys. first thing you need to do is put lower compression pistons in the motor. if the motor isnt built to handle a blower you better start from the ground up...
__________________
Chris
As close to "Normal" as I can get...
Chris
As close to "Normal" as I can get...
#3
:shock: Just send me a couple of grand and me and you will be much happier
Really , you need to be more specific,,is it a gm blower that needs converting???street???strip???alcohol???gas???indu ction???
if it needs converting the best thing to do is send it to a blower shop and tell them your intentions and most of them will tell you what you need..good luck and let me know and I will send you my address so you can send the money :lol: :lol:
Really , you need to be more specific,,is it a gm blower that needs converting???street???strip???alcohol???gas???indu ction???
if it needs converting the best thing to do is send it to a blower shop and tell them your intentions and most of them will tell you what you need..good luck and let me know and I will send you my address so you can send the money :lol: :lol:
#4
Senior Member
EXPERT BUILDER
Join Date: Mar 2007
Location: Michigan
Posts: 379
Go to www.blowerdriveservice.com they have alot of info on there web site. Helped me alot. Good luck