Results 1 to 3 of 3

Thread: Regulator placement

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Feb 2004

    Regulator placement

    I was told fuel regulators for nitrous need to be close to the solenoids. Is this true?

    I'm thinking of mounting two (one for each system) right above the water pump on a bracket with a fuel log. That will be about 12" to each side of the fogger and maybe 6-8" from the plate.

    How about the regulator for the carb? Should I put it on the log too? It's on the fender well right now with about 30" of line to front bowl and 30" to rear bowl. One regulator port goes to front bowl and one goes to the rear bowl.

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Coldwater, MI
    The closer the better, your nitrous will be fine but the carb I feel is to far.

    Last year I had my nitrous regulator on my dragster about 28" away, while testing it, I noticed it dropped to "0" when activated even with the return regulator. I mounted it withing 12" of it and its much ebtter now.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines

  3. #3
    Junior Member SHOW GUEST
    Join Date
    Feb 2004
    Thanks for the reply.

    I researched on the net and found out that regulators in front of the carb/solenoids is more desirable because of the g-forces during launch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy