roll cage question, please help
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2005
Location: Hobbsville, NC
Posts: 20
roll cage question, please help
i have a 65 chevelle which i just had certified to 8.50... getting the car wired now and the cage is painted, question is, im using a roll bar mount control panel and want to tap the front main hoop bar to install the control panel so i dont burn any of the paint, is this legal...thanks alot, rob
#2
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
I'm pretty sure it's legal, but you could fab a saddle mount out of tubing with tabs for your panel that clamps to the cage. Use T-bolt clamps. They don't look as cheezy as hose clamps......
#3
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
You can buy the brackets already fabericated, but don't know whitch switch panel you have. You may be able to use these, check the website below.
Zip.
http://www.pegasusautoracing.com/gro...roupID=ROLLACC
Zip.
http://www.pegasusautoracing.com/gro...roupID=ROLLACC