Enderle injection . nozzles and pills
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
Enderle injection . nozzles and pills
I need your guys thoughts again. I am just about to run up my 632 BBC that i have been building for the last 6 months. I need to know what size injector nozzles and pills to run for first start up on the dyno. I can tune it from there.
Stats are:
632 Big Block chev , 14-1 CR , Mild port BB3 Xtra heads. Enderle bird catcher on edelbrock victor 2R Ram. 800-800 lift 114 lobe seperation 4-7 swap cam. Let me know what else you guys need. Its in a 2800lbs super stock. 1.80 2 speed glide with 4.86 rear end.
any help much appreciated
Stats are:
632 Big Block chev , 14-1 CR , Mild port BB3 Xtra heads. Enderle bird catcher on edelbrock victor 2R Ram. 800-800 lift 114 lobe seperation 4-7 swap cam. Let me know what else you guys need. Its in a 2800lbs super stock. 1.80 2 speed glide with 4.86 rear end.
any help much appreciated
#6
Senior Member
MASTER BUILDER
Join Date: Mar 2003
Posts: 127
sorry for the delay. But I have to agree about using 4.30 maybe even a 4.10 gear for the 1/4...A motor like thant will have a bunch of low end power and then add alcohol to that and the torque curve comes down even more .
another guy for fuel injection help who is in your part of the world is Ken Lowe out of Austrailia
www.kenlowe.com.au
another guy for fuel injection help who is in your part of the world is Ken Lowe out of Austrailia
www.kenlowe.com.au