just a BBC question on a 632
#1
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Jul 2003
Location: Chelsea Oklahoma
Posts: 556
just a BBC question on a 632
if you bought a 632ci is it maxed out ?? meening is it.maxed bored or do you have some re builds left in it ?? or is it just all rod and crank stroke. to get it this big ?? just wondering
#2
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Re: just a BBC question on a 632
Originally Posted by bigray
if you bought a 632ci is it maxed out ?? meening is it.maxed bored or do you have some re builds left in it ?? or is it just all rod and crank stroke. to get it this big ?? just wondering
A 632 is 4.600 Bore with a 4.75 Crank. You can take a bowtie and most aftermarket blocks to 4.6250 bore sometimes 4.6300 to make it bigger. Depending on the block you have you may be able to put a bigger stroke crank in it, but I doubt it.
#3
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Jul 2003
Location: Chelsea Oklahoma
Posts: 556
thanks for the info.we are going to a big dragster next year.this is our last year in Jr.s and have been looking at some of C.A.M. performace motors.from RJ .member Murry..would like to go low comp.but big cubic inch..thanks for the info