sbc info
02-22-2009, 03:12 PM
Member
JOURNEYMAN
Thread Starter
Join Date: Nov 2008
Posts: 31
sbc info
400 sbc i bought from a guy, he never ran it, but the motor is bored 0.60 over i'm wondering if it is to much , and if any body have info on a motor like that and bored that much. block 4 bolt.
02-22-2009, 07:06 PM
Senior Member
EXPERT BUILDER
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Have it sonic tested before you go any further!!
02-22-2009, 08:21 PM
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
Quote:
Originally Posted by hink
Have it sonic tested before you go any further!!
X2, i've always thought .040 was pushing the limits.
JMO
Zip.
02-23-2009, 05:50 AM
Member
JOURNEYMAN
Thread Starter
Join Date: Nov 2008
Posts: 31
sbc
in any what is the worst case scenario?
02-23-2009, 06:54 AM
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Re: sbc
Quote:
Originally Posted by chubbyx1
in any what is the worst case scenario?
Just a WAG on my part, but internal parts, converting to external parts? Hit me with the flame-thrower, I got it coming :!:
02-23-2009, 07:30 AM
Member
JOURNEYMAN
Thread Starter
Join Date: Nov 2008
Posts: 31
sbc
I'm new to all of this, sounds like your saying it is going to blow up.
02-23-2009, 08:13 AM
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Re: sbc
Quote:
Originally Posted by chubbyx1
I'm new to all of this, sounds like your saying it is going to blow up.
No sir, but you asked for a worst case scenario.
02-23-2009, 08:20 AM
Senior Member
SENIOR BUILDER
Join Date: Sep 2008
Location: CENTRAL WISCONSIN
Posts: 114
400
IS IT STREET DRIVEN OR JUST RACED?
02-23-2009, 08:58 AM
Member
JOURNEYMAN
Thread Starter
Join Date: Nov 2008
Posts: 31
sbc
street and race
02-23-2009, 10:09 AM
Member
JUNIOR BUILDER
Join Date: Oct 2005
Location: ohio
Posts: 94
thin cyl. walls and heat can only produce cracks...