Dedenbear CC-3 delay box- Help!
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: May 2005
Location: Dexter, New Mexico
Posts: 69
Dedenbear CC-3 delay box- Help!
Am I missing something or is there a way/need to "flash" or "reboot" this delay box? After finishing wiring the car I powered everything up, all seemed OK, same numbers and settings were still in there from last season, ran through a t-brake and shift cycle, worked OK. Next time I power it up, all the LED indicators except the t-brake are lit up, all the settings are changed, and basically the box won't respond to any inputs. I've read the help sheet a zillion times and there's no mention of anything like this. Anybody run into this? :? :? 8) JB
#2
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Jim you may have a bad ground or power coming from a wrong source. Have you gotten your new car in? I was hoping it would take another year or so, so that way I might have a chance at winning a few before you get back and in the groove.....
#3
Member
JUNIOR BUILDER
Thread Starter
Join Date: May 2005
Location: Dexter, New Mexico
Posts: 69
Well, I guess it fixed itself. I think it was in the wrong shifter mode and a few other things, but it looks like it went back to work. So far so good. Dean, should be finishing the car up by next weekend, looking to test somewhere on the 28th or 29th, you guys doing anything? 8) JB
#4
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
We just finished laying 200 ft of cement gaurd rail to gaurd rail from the water box out 90ft past the starting line. We're waiting on Rusty to come out and run new wiring for the lights and computer. He was suppose to be out this week but has postponed for 2 weeks. Our first TNT is March 14, he's really cutting it close. If I were you I might miss the first TNT, until we get rubber down on the new cement. Andy's going to use VHT this year its more expensive than Lane Choice, but I think it works better. I'm probably going to test at Midland the first of March. I'll let you know when that is maybe we can meet over there. take care
#5
Member
JUNIOR BUILDER
Thread Starter
Join Date: May 2005
Location: Dexter, New Mexico
Posts: 69
Thanks for the update - I'll probably have to go to Midland the 28th cause I'm leaving for Tucson the following Weds. They are having a S/C race on Weds. and the NHRA divisional starts on Thurs. Just hoping for a warm track @ Midland! See you soon! 8) JB
#9
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Originally Posted by dparker
How far are you from Denver? We plan on trying to race Bandimere this year, we have family in that live in Lakewood.
#10
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Originally Posted by Tod74
:x I HOPE IT RAINS ON YOU GUYS!! It was 14 deg here today.