Street legal cup conversion
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Sep 2008
Posts: 2
Street legal cup conversion
Im looking to convert an "old school" cup or busch chasis to street legal specs for my state but what i dont know is a fair price range on a full roller road course chasis circa 1990-1995 in good condition if anyone could give me a ballpark figure on what one would usually go for it will help me a bunch in setting a budget for my project thanks alot!
#2
Junior Member
SHOW GUEST
Join Date: Feb 2008
Posts: 2
My neighbor has done the same thing!
But to answer your question...about 2500 for a full roller car body and all.
Check around for racer auctions, we have several around here and every other one seems to have one there. There is not alot of use for them so dont give too much.
But to answer your question...about 2500 for a full roller car body and all.
Check around for racer auctions, we have several around here and every other one seems to have one there. There is not alot of use for them so dont give too much.