Results 1 to 3 of 3

Thread: Two Quick Questions...

  1. #1

    Two Quick Questions...

    1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

    2)ERSON cams/springs/locks...feedback?

    Thanks >learning something new every day.

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998

    Re: Two Quick Questions...

    Quote Originally Posted by HamerDown
    1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

    2)ERSON cams/springs/locks...feedback?

    Thanks >learning something new every day.
    I know the roller lifters are made by Morel for PBM, just got a new set last week (5th set all top notch)

    Erson is good stuff, Erson is owned by PBM, Manley makes the Erson springs but usually $40-50 less a set then the Manleys. Not sure who makes the cams for them but have ran it for 2 years in my 582 good stuff also. Just ordered a new set of Erson Springs, to my door $252.00 Manley price was above $300 same spring.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  3. #3

    Re: Two Quick Questions...

    Quote Originally Posted by hammertime
    Quote Originally Posted by HamerDown
    1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

    2)ERSON cams/springs/locks...feedback?

    Thanks >learning something new every day.
    I know the roller lifters are made by Morel for PBM, just got a new set last week (5th set all top notch)

    Erson is good stuff, Erson is owned by PBM, Manley makes the Erson springs but usually $40-50 less a set then the Manleys. Not sure who makes the cams for them but have ran it for 2 years in my 582 good stuff also. Just ordered a new set of Erson Springs, to my door $252.00 Manley price was above $300 same spring.
    Thanks for the reply...so it would be a safe bet to say the PBM hyd roller specks out to be exact as the rollers in a Morrel box.
    Any feedback on if Manly 4340 H-beam rods are the same as Engine-Pro...just a different box?
    interesting stuff to say the least.

  4. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy