mrtopdogg

im currently building my first small block its a 350 bored 40 over im trying to build a 357 block fresh from machine shop all arp main bolts an head studs 4valve release flattops my heads are rhs 220 20.2 /1.60 64cc i know their big but i got them on sale. have 2 intakes a rpm air gap an a tm-1, 750 holley i have a 350 turbo with shif kit 373 posi rear will change gears if itll help in a monte carlo i need tips an suggestions on a cam an stall that will work with what i got will be used for street an strip

JEFF69Z28

YOU IN THE RIGHT PLACE FOR ADVICE.IM DOING THE SAMETHING(406 CID) I'VE BEEN IMFORMED TO USE 4.30 TO 4.56 GEARS AND 4500-5000 STALL TO GET IT OUT OF THE HOLE.I BOUGHT AFR 210 HEADS AND THEY HAD COMP CAMS GRIND ME A CAM TO MATCH MT SET UP.CALL COMP CAMS AND THEY WILL BE ABLE TO HELP YOU WITH A CAM AND ATI FOR A CONVERTER.

mrtopdogg

bracket master2 300/ 300 , intake 515 exhuast 515 stall 2800-3200