stang rear set up

Old 01-22-2009, 07:30 AM
  #1  
twobad1
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Nov 2007
Location: annapolis md
Posts: 43
Default stang rear set up

chevy guy building a 90 mustang drag car 10-11 sec car
w/adj uppers, plates ,etc.wheres a good place to start for best traction?
2deg dn? 0? antiroll any help?9in tire.8.8 430:1
twobad1 is offline  
Old 02-06-2009, 08:20 AM
  #2  
bryanm
Member
JUNIOR BUILDER
 
Join Date: Apr 2003
Posts: 79
Default

I set my Mustang up with 2-3 degrees pinion angle and no preload on the anit-roll with the suspension loaded. What other suspension do you have.. shocks, struts, coil-overs??
bryanm is offline  
Old 02-08-2009, 10:14 AM
  #3  
twobad1
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Nov 2007
Location: annapolis md
Posts: 43
Default

lakewood coil overs up front,strait lowers/adj uppers w/factory springs
for now but it does have upper coil over/anti-roll installed for future use
aje-or similar k-frame w/mid-front plate & pg tubular x-member
and yes its tied in w 14pt cage & factory sheetmetal
thanks for the input!
twobad1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -