NOTCHING REAR FRAME IN A G-BODY
#2
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
i notched mine before i backhalf it ,had a 29x10.5 under it ,i plated it and put a crossmember in it, worked pretty good but i'm happier with the backhalf,14x32's under it now.hope this helps ,john
#3
Junior Member
APPRENTICE
Join Date: May 2003
Posts: 20
Notching the rear frame on a g body is done quite a bit. My Cutlass has one. Mine has an added crossmember, crossmember for the coilovers, and the antirollbar in there. No problem with twisting or loss of frame support. Go to maliburacing.com and do a search for frame notching. Lots of info there and pictures.