Results 1 to 2 of 2

Thread: aluminum verses steel ros on blower motor

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Jan 2004

    aluminum verses steel ros on blower motor

    what is your opinion on using h beam rods verses aluminum rods on hp over 1150?

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    On a blower motor, i think and use alum rods. I got BME 5.850's in my 383" that put's the piston .025 down with a 9.000 deck, with a 1471 on alcohol, that's the only motor i have that will produce 1100 HP i think Alum rods absorb the impact a little softer therefore easier on the crank and bearings, but my other unblown S/BLK's have "H" beams or Lonatti promod rods.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy