Results 1 to 3 of 3

Thread: max stroke

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    4

    max stroke

    Has anyone used 4.5 stroke crank in 427t tall deck block. i am cosidering using a 4.375 but may use 4.5 stroke. any ideas/issues!!

  2. #2
    it will fit but you will have to do some clearancing on the bottum of the cyls. and the pan rail...I have done it...good luck

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Jan 2005
    Posts
    336
    id say if you can get the 4.5 in there,put a eagle 4340 steel 4.5 stroke crank in there.i spin my4.5 inch eagle crank into the mid to upper 7000 rpm range in my chevelle.the more cubes the more power,but then on the other end chances are this is going to be street/strip application so then why spin the thing hard when low speed torque is soooo plentiful!!!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy