750 hp blower carbs on a non-blown engine
11-30-2008, 07:00 PM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: May 2006
Location: Pikeville KY
Posts: 109
750 hp blower carbs on a non-blown engine
I have 2 new 750 hp carbs that was purchaced for a blower application, sold the blower and still have the carbs. What do I need to do to run them as a pair on a 468. I think metering block has a vac. port on it to run to the blower for the power valve's. I plan to plug the power valve's. What else do I need to do?????
12-01-2008, 10:38 AM
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
If you block the power valves you'll need to jet up 8 to 10 sizes.
12-26-2008, 03:31 AM
Senior Member
MASTER BUILDER
Join Date: Jul 2006
Posts: 184
The main difference is that the blower carbs, have boost referenced power valves. Just plug that off, and tune it like you would oterwise, and they should work well.
Frank
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off