16 volt batteries??

Old 11-23-2008, 08:16 PM
  #1  
dparker
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default 16 volt batteries??

I'm running a dragster with vacuum pump and belt drive fuel pump. So I'm not going to have room for my alternator. I'm thinking about going to a 16 volt battery. I have never ran anything but 12 volt system. Is the 16 volt battery a good option and if so whats the best 16 volt battery to buy. Has anyone noticed any advantages and/or disadvantages to the 16 volt system?
dparker is offline  
Old 11-23-2008, 08:36 PM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

They do have a lot more cranking power which is a good upside, also having plenty of voltage is a plus

Dowsides, more $ up front for battery and chrager, will need charged every round, when a 16v goes low it takes a lot longer to charge.

IMO a good Napa Orbital or 2 if you have room, and a charge every round will be fine.

I had to move my vac pump so the alt would fit.
hammertime is offline  
Old 11-23-2008, 08:38 PM
  #3  
dparker
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

Send me a pic of the front of your engine with everything on it if you get a chance David.
thanks,
dean
dparker is offline  
Old 11-23-2008, 09:28 PM
  #4  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Here ya go








hammertime is offline  
Old 11-24-2008, 04:27 AM
  #5  
BEAST477
Senior Member
RACING JUNKIE
 
BEAST477's Avatar
 
Join Date: Feb 2007
Location: Michigan
Posts: 1,900
Default

x2 what hammertime said.
BEAST477 is offline  
Old 11-24-2008, 06:13 AM
  #6  
dparker
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

Now that I like!!
Where do you have the catch can for the smog pump mounted? My new vacuum pump has v groove pullies, do you think they'll give any problems with the pump mounted that far away. Do you still have any order numbers for the alternator stuff on your car. I'd like to order the exact same part to make sure it will go in the same place.
thanks again
dparker is offline  
Old 11-24-2008, 08:37 AM
  #7  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Originally Posted by dparker
Now that I like!!
Where do you have the catch can for the smog pump mounted? My new vacuum pump has v groove pullies, do you think they'll give any problems with the pump mounted that far away. Do you still have any order numbers for the alternator stuff on your car. I'd like to order the exact same part to make sure it will go in the same place.
thanks again

I have the catch can mounted under the motor, empty it every 3-4 passes, but could go longer without needing it. The only reason I have my vac pump on the right side of the motor instead of the left is that how the valve covers were setup and I didnt want to buy new chromes at the time. You could actually mount it on the top left on the head where its made to be mounted and it'd work well. The pump wont matter that its that fat away as long as you have the belt setup correct. I like the gillmer pulley setups for everything so they dont slip but have used the vbelt int he past.

Here is the bracket and alt I used
http://www.jegs.com/i/East+Coast+Aut.../2220/10002/-1

and 90% sure this is the alt I used
http://www.jegs.com/i/East+Coast+Aut.../2003/10002/-1
hammertime is offline  
Old 12-02-2008, 07:57 PM
  #8  
showtimebob
Junior Member
SHOW GUEST
 
Join Date: Jul 2004
Posts: 6
Default

I mounted the alt and vac pump off the engine plate and ran them off the same v belt. The alt was mounted solid and the vac pump bracket was the adjustment. Not only worked but i could change belts and just run the vac pump on race day.
showtimebob is offline  
Old 01-23-2009, 09:54 PM
  #9  
ashbros
Senior Member
RACING JUNKIE
 
Join Date: Nov 2004
Location: St. Louis, Missouri
Posts: 661
Default

powermater is a really good brand
16 volt battery and charger will run 425 to 475 new :cry:
ashbros is offline  
Old 02-05-2009, 07:45 PM
  #10  
robsbird
Member
JUNIOR BUILDER
 
Join Date: Aug 2007
Posts: 69
Default charging

will a 12 volt 40 amp and 200 amp charger work ok with a 16 v battery rob
robsbird is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -