Merlin Pro Block

Old 11-18-2008, 07:27 PM
  #1  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default Merlin Pro Block

Has anyone used the Merlin Pro Block with the raised cam location? Is it better than the Merlin 111 block? Also is it better than the Dart block? Thanks
michael1 is offline  
Old 11-20-2008, 06:45 AM
  #2  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

ive heard that the common vote is dart over merlin. only complaint with my dart tall bbc block is my jesel belt drive hit a boss & needed to be milled.perhaps jesel or dart fixed this problem by now,dunno.

food for thought,dart makes a 11.1 inch deck height.i wished this would of been out when i built a motor two years ago
russ67chevelle is offline  
Old 11-27-2008, 06:24 PM
  #3  
PAR
Junior Member
APPRENTICE
 
Join Date: Jun 2006
Posts: 14
Default

HEAVY HEAVY HEAVY!!!!!! Unless you are building over 632 inch's, use a Big M with Ductile cap and standard cam, anything bigger needs aluminum block from Brodix.
PAR is offline  
Old 11-28-2008, 08:43 AM
  #4  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

Thanks fo the info,I already got the block and it is only about 23lbs heavier than the dart or merlin lll. I couldn't pass up the price.
michael1 is offline  
Old 11-30-2008, 07:22 AM
  #5  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

michael which block did u buy that was 23 lbs heavier?the 11.1 deck dart?
russ67chevelle is offline  
Old 11-30-2008, 08:03 AM
  #6  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

10.2 deck with the raised cam
michael1 is offline  
Old 12-08-2008, 07:34 AM
  #7  
Pwmax
Senior Member
MASTER BUILDER
 
Join Date: Jul 2006
Posts: 184
Default

Earlier this year, we did a 706 truck pull engine, using a Dart 11.1 tall deck race block, with raised cam, iron, with billet caps. Shipping weight was over 330lbs!!. I called it the PB Nut Blaster block, as moving it around, you got an instant hernia, lol. For a drag car, No way, WAY to heavy. For the truck pull deal, just fine.

Frank
Pwmax is offline  
Old 12-08-2008, 09:42 AM
  #8  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

I already have it and 23 lbs is not a big difference in a car that already weighs 3300-3400 lbs.How do you like the quality?
michael1 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -