Camshaft
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Jun 2007
Location: FayettevilleN.C.
Posts: 215
Camshaft
Just wondering if someone can help me decide which cam i should run.I have 2 cams both are in great shape.1 is an edelbrock 234/244@50 with 488-510 lift.308/318 advertised.Other is a crane cam 320/320 480/480 older but cant find much more info.it has 228/320 stamped on end.Im building a 4 bolt 350 60 over with a tunnel ram with 2 450s.Car is tubbed with ford 9 inch.Havent gotten heads yet but putting bottom end together.Th350 with stall, but exact stall not decided yet.I want a lopey to rough idle with good power.Not sure what other info is needed to decide which cam is better.Thanks for any info.Randy.
#2
Senior Member
MASTER BUILDER
Join Date: Jan 2008
Posts: 146
id prolly go with the edelbrock cam myself ,and twin 500's or 600's
believe me the motor will like more fuel available rather than starving
get some edel heads there cheep enough for chevy's now a days
and use the best springs retainers,and valves instead of just the ones that will get you by
believe me the motor will like more fuel available rather than starving
get some edel heads there cheep enough for chevy's now a days
and use the best springs retainers,and valves instead of just the ones that will get you by
#6
This is a good head for your combo with springs matched for your cam.
http://www.competitionproducts.com/p...er=10310010PK1
http://www.competitionproducts.com/p...er=10310010PK1
#7
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Jun 2007
Location: FayettevilleN.C.
Posts: 215
Thanks Mark.Those are sweet,but a little out of my price range.Could someone maybe tell me what size i need.Runners chamber and such.I do know im looking for 202 160 valves but other than not sure.Thanks.