750 DOMINATOR
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Nov 2003
Posts: 19
750 DOMINATOR
Hi guys
my friend gave me a 750 dominator carb i have the adapter plate i was thinkin about
putting on my motor is
zz4 350/355
power plus intake open plain
edelbrock rmp heads...202/160...64cc
crane hydrauilie roller cam 234/[email protected] dur.296/304
539/558
speed demon 750 mechanical secondari
this is a street car
like to know what you think............thanks
my friend gave me a 750 dominator carb i have the adapter plate i was thinkin about
putting on my motor is
zz4 350/355
power plus intake open plain
edelbrock rmp heads...202/160...64cc
crane hydrauilie roller cam 234/[email protected] dur.296/304
539/558
speed demon 750 mechanical secondari
this is a street car
like to know what you think............thanks
#5
Junior Member
SHOW GUEST
Join Date: Sep 2007
Posts: 7
depends on if its a 2 or 3 circuit carb.
it can be converted to a 2 circuit easily anyway.
I have a friend who ran a 2 circuit with success on a 355 w/auto trans.
poor idle below 1000rpm but he didnt play with the air bleeds.
boosters are easy enough to change on the 4500/750 to go to 1050 :twisted:
I have used the old 1000 cfm 3 barrel on a 350 I ran and it really made good power, and idles better since the primarys are smaller. not much better than the 4150/850 on that size engine IMO.
it can be converted to a 2 circuit easily anyway.
I have a friend who ran a 2 circuit with success on a 355 w/auto trans.
poor idle below 1000rpm but he didnt play with the air bleeds.
boosters are easy enough to change on the 4500/750 to go to 1050 :twisted:
I have used the old 1000 cfm 3 barrel on a 350 I ran and it really made good power, and idles better since the primarys are smaller. not much better than the 4150/850 on that size engine IMO.