Who can port my bowtie iron heads?
#2
#3
Gunho. i want to give you some heads up on the cast iron porting thing..
1- if you get this done make dern sure you have the right person doing the port work or it can hurt them, as with any port work to any head.
2- Give it some thought about putting a-lot of money in a cast head..( find the right port guy and have it priced)..i am confident a good port man will not be cheap.
3- Before putting a ton of money in a cast head..go ahead and start you a "HEAD FUND"....and go buy you some off the shelf CNC ported DART PRO-ONE heads.or AFR'S with similarspecs
why ?...because these heads are gonna have Bigger valves ( much more HP)...flow much better, lighter.....also if you ever crack one or go as far as blowing a chamber completly out you can have it fixed since its aluminum.
i think once you check the price of Quality port work that will amount to anything you could have put a little more to it and went 1st class..
been there done this one before.
1- if you get this done make dern sure you have the right person doing the port work or it can hurt them, as with any port work to any head.
2- Give it some thought about putting a-lot of money in a cast head..( find the right port guy and have it priced)..i am confident a good port man will not be cheap.
3- Before putting a ton of money in a cast head..go ahead and start you a "HEAD FUND"....and go buy you some off the shelf CNC ported DART PRO-ONE heads.or AFR'S with similarspecs
why ?...because these heads are gonna have Bigger valves ( much more HP)...flow much better, lighter.....also if you ever crack one or go as far as blowing a chamber completly out you can have it fixed since its aluminum.
i think once you check the price of Quality port work that will amount to anything you could have put a little more to it and went 1st class..
been there done this one before.
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#5
Junior Member
SHOW GUEST
Join Date: Dec 2006
Posts: 3
Originally Posted by bjuice
go buy you some off the shelf CNC ported DART PRO-ONE heads.or AFR'S with similarspecs
why ?...because these heads are gonna have Bigger valves ( much more HP)
Valve size is part of the combination, and can be over done, just like too big of cam.