598 dart by competition products
#2
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jan 2007
Posts: 9
#3
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Never used there stuff before but compstar stuff is decent know people who use them upto 1100hp use good rod bolts.
also check out www.nyesautomotive.net for good short blocks that I have used.
also check out www.nyesautomotive.net for good short blocks that I have used.
#4
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
#5
Member
MASTER JOURNEYMAN
Join Date: Dec 2007
Location: Grand Prairie, Texas
Posts: 36
ATK ENGINES
If its a Dart built motor I have heard good things.
We also do a 598 for $4899 shipped to your door.
http://high-performance-engines.com/...duct_Code=SP45
We also do a 598 for $4899 shipped to your door.
http://high-performance-engines.com/...duct_Code=SP45
#6
nothing wrong with Compstar. see link below..High profile Engine Builder "PAR RACING ENGINES" uses the Compstar or Manley "h" beam in his 565 and 582 ci
Also for the record PAR'S 565ci makes 1050 hp with conventional oval port heads. He can take the 565ci well over the 1150 Hp range getting a little more exotic..
i have callies compstar rods and a callies stealth crank in my new 565ci..it makes right at the 1,000 hp mark..my heads are a little less then the 3x oval port
http://www.parraceengines.com/engines/582.htm
Also for the record PAR'S 565ci makes 1050 hp with conventional oval port heads. He can take the 565ci well over the 1150 Hp range getting a little more exotic..
i have callies compstar rods and a callies stealth crank in my new 565ci..it makes right at the 1,000 hp mark..my heads are a little less then the 3x oval port
http://www.parraceengines.com/engines/582.htm
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "