Results 1 to 6 of 6

Thread: Dart Iron 345

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Jun 2005
    Location
    potash country
    Posts
    262

    Dart Iron 345

    I'm not sure why but I just bought a set of used Dart Iron Eagle 345 heads with 2.25 valves,I guess they were a good price.
    They are not ported but have had some bowl blending. Is there anyway at home I can measure what cc the combustion chamber is? And what are these thing suppose to flow,int and ex. stock?
    If a 5 lb hammer can't fix it,it must be electrical
    Keep the shiney side up! 8)
    http://www.racingjunk.com/profile/85221

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    If you can get your hands on a beret, or any cc measuring device, you can drill a 1/4" hole in a plexaglass plate, with the valves installed lay a thin layer of grease around the combustion chamber and fill up the combustion chamber, keeping track of the cc's poured into the chamber. No way to measure the flow except on a machine.

    Zip.

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Jun 2005
    Location
    potash country
    Posts
    262
    Thanks Zip! I mentioned that to the wife and she said that she has an old syringe from one of the kids medication bottles kicking around so I'll try that.
    If a 5 lb hammer can't fix it,it must be electrical
    Keep the shiney side up! 8)
    http://www.racingjunk.com/profile/85221

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    You can get a cheapo cc kit from Jegs for a little of nothing...works just fine.Comes with a Plastic buret and a piece of plexiglass. I use green alcohol cause it's easy to see and clean up...but with iron heads the alcohol may cause it to rust pretty quick

  5. #5
    Senior Member EXPERT BUILDER
    Join Date
    Jun 2005
    Location
    potash country
    Posts
    262
    I went on Jegs web sight and they sell a Proform cc kit #778-66831 for $129.99
    Also Moroso,Isky,Comp Cams have 'em.

    Thanks for the info
    If a 5 lb hammer can't fix it,it must be electrical
    Keep the shiney side up! 8)
    http://www.racingjunk.com/profile/85221

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    Quote Originally Posted by nofear69
    I went on Jegs web sight and they sell a Proform cc kit #778-66831 for $129.99
    Also Moroso,Isky,Comp Cams have 'em.

    Thanks for the info

    JEGS has a cheapo BY COMP CAMS that works just fine...4O bucks

    But really all you need to find is a cheap buret and a piece of lexan/plexiglass bigger than your chamber.

    http://www.jegs.com/i/Comp%20Cams/249/4975/10002/-1

    http://www.circletrack.com/techartic...o_measure.html


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy