Results 1 to 3 of 3

Thread: max stroke in sbc bowtie with 55mm cam/aluminum rods/steel r

  1. #1

    max stroke in sbc bowtie with 55mm cam/aluminum rods/steel r

    Does anybody have any info on the max stroke that can be installed with out any grinding in a sbc bowtie block, 9.025 deck height with the 55mm roller cam with both aluminum rods and steel rods? 3.500, 3.625, or 3.750 stroke? Rod journals will be 2.00. Thanks for any info. Jeff klei.

  2. #2

    stroke

    all i can tell you is that in a stock 350 block with stock stroke you will need to notch block for aluminum rods and depending on what brand rod some you need to notch more, i used bill miller and had to clearence just the od bolt heads.. hope this helps

  3. #3
    Thanks for the info. I have mgp rods with the 3/8 rod bolt on the 2.00 journal. I think I will stick with the 3.500 stroke and take my chances. Thanks again, Jeff klei.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy