Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: My experience with RJ user- 1967c2

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    Jan 2008
    Posts
    1,289

    My experience with RJ user- 1967c2

    Since we slay (I wish) the corrupt, I thought a good post would be cool. I haven't asked him if I could reveal his real name, so I am not. He goes by 1967c2.

    I drove from NC to his home in Va, approx 3 hours one way, to trade some bbc stuff for a set of buckets for my '68 Nova. He did everything I would expect a seller to do, great communication, attitude, etc. His description was beyond good, the seats were much nicer than I had anticipated! The only thing I will have to do is add a small piece of trim and install the headrests (and he told me this BEFORE I left NC), everything else on the seats is perfect! I couldn't ask for a deal to have gone any better. If you have had a bad experience with this guy, I would be very suprised!

    When I left, I had forgotten the hardware for the headrests, I received them in the mail very shortly afterward.

    Thanks again 1967c2!

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Hey Rudy,
    We're building a 1970 Nova, and in need of the side windows crome molding, both sides, do you have any of these laying around? We're about 80 hrs. from paint, absolutely no rust, no bondo. It will be up for sale when finished.
    I know we can buy the trim after market for about $240.00, but if someone has it and not useing it that's better.

    Zip.

  3. #3
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Either one of you need a new glass rear bumper for a 68 thru 72 nova,[ free of course] sent to me by unlimited products, by mistake two years ago? I run MOPAR'S as you know. Oh by the way glad to hear some good new's for a change on here. glad it worked out for you!!!
    Head's up the true drag race!!

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Jan 2008
    Posts
    1,289
    Thanks for the offer Mopar, but I would never use it. Besides, I am sort of wondering, after being mixed in with your Mopar stuff, well, if maybe, well, you know..............could it be contaminated? :lol: :lol: :lol: :lol:
    Just kidding man, I like your Mopars!

  5. #5
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    :lol: :lol: Why do you think i am trying to get rid of it? :shock: :shock:
    Head's up the true drag race!!

  6. #6
    Senior Member DYNO OPERATOR
    Join Date
    Oct 2004
    Location
    florence ky
    Posts
    498
    Mark i could use it just let me know how much for the ride. Thanks Ron

    I have a nova that could use that.

  7. #7
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    You got it Ron on it's way to you.
    Head's up the true drag race!!

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    OOPS!!!
    Ron beat me too it, but i personally donot need it, but there is a friend at Twin Cities that runs a 69 cuda with a 360. I donot know if he has FG bumpers, but he always runs the throttle stop to run 9.90, he can actually run 9.40's. I am going to Twin Cities Friday nite to try to improve on the 66 Biscyne street car. It's pump gas 468 and has run 10.70's with street slicks muffers off. I'm going to try to get this 3700lb slug into the 10.50's which i think would be awsome, for a car that you can drive to Sonic, listen to music, eat your burger and then drive back home. I built the motor about 3 mos. ago but have only been to the track 2 times sorting it out. Best so far is [email protected] Hopeing to do better.

    Zip.

  9. #9
    Senior Member RACING JUNKIE
    Join Date
    Jan 2008
    Posts
    1,289
    Zip,
    Sorry man, no luck on the chrome for the windows.

    Ya'll don't forget about what I said about 1967c2,,good guy!

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Mar 2008
    Location
    falkville al
    Posts
    1,766
    if you still got the glass bumper ill buy it from you


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy