Roller lifters
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Roller lifters
What's everyone using for roller lifters? I am looking to get new lifters and boring my lifter bores out to fit the .904 lifters on my BBC dart block. With everything out there and all the options I can get what would you guys recommend. I have used Crower in the past but am not going with them anymore since they don't rebuild there lifters anymore. I am looking at the isky redzone lifters and am steering toward them, but is there something better? Let me know.
#2
Junior Member
APPRENTICE
Join Date: Mar 2003
Posts: 24
Your exactly on track, Isky Red Zone would be my choice, I have used approx. 30 sets of the Red Zone pressure fed rollers in 622, 638, 706cid - max effort applications. Getting very good cycle duty from these with zero failure. I also used Crower for years and had some issues with them, since going to the Isky Red Zone, I won't go another way. Thanks.
#5
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998