INSTALLING RIM SCREWS
08-07-2008, 05:42 PM
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Dec 2005
Location: berea,ky
Posts: 184
INSTALLING RIM SCREWS
Any tricks i need to know when installing rim screws.Will it mess up the bead on the tires and will it work alright with tubeless tires.Thanks
08-07-2008, 09:07 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
MAKE SURE THE INSIDE SCREWS ARE IN LINE WITH THE OUTSIDE SCREWS.
08-08-2008, 09:39 AM
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
tod is right & they do make a tool to help with spacing.(i just made my own its cheaper)
08-10-2008, 04:14 AM
Senior Member
MASTER BUILDER
Join Date: May 2003
Location: North East, Maryland
Posts: 159
make sure you use 1 of the screws to run in the holes after there drilled to give them some sort of tread in the rim. It will make for an easier job when tire is mounted.
08-10-2008, 05:57 PM
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Dec 2005
Location: berea,ky
Posts: 184
rim screws
What is the formula to figure out the spacing.I was going to put 8 screws on each side.The rim is 15". Thanks
08-10-2008, 06:23 PM
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
A wheel is a circle, a circle is 360 degrees, 360 dregrees divided by 8 rim screws = 45 degrees apart...
08-10-2008, 07:07 PM
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Re: INSTALLING RIM SCREWS
Quote:
Originally Posted by lanham
Any tricks i need to know when installing rim screws.Will it mess up the bead on the tires and will it work alright with tubeless tires.Thanks
dont use them :lol:
08-10-2008, 07:32 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Re: INSTALLING RIM SCREWS
Quote:
Originally Posted by hammertime
Quote:
Originally Posted by lanham
Any tricks i need to know when installing rim screws.Will it mess up the bead on the tires and will it work alright with tubeless tires.Thanks
dont use them :lol:
Hammertime what do you use? beadlocks? or Hightack? I consisdered using High tack on my new wheels rather than screws....never tried it before though.
08-10-2008, 08:22 PM
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Re: INSTALLING RIM SCREWS
Quote:
Originally Posted by Tod74
Quote:
Originally Posted by hammertime
Quote:
Originally Posted by lanham
Any tricks i need to know when installing rim screws.Will it mess up the bead on the tires and will it work alright with tubeless tires.Thanks
dont use them :lol:
Hammertime what do you use? beadlocks? or Hightack? I consisdered using High tack on my new wheels rather than screws....never tried it before though.
I use neither, I mark them to start year and they dont usually turn it they turn i put screws in but more often then not they dont turn. 1.04 60ft best without turning at all, I've seen some turn 1/4 way in 1 pass though. its best to not screw mark then if needed screw
08-11-2008, 02:19 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585