JET Recommendation
07-19-2008, 06:56 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
JET Recommendation
I believe the carb number is 4575.
I blocked the power valves and added 90 jets squared. It has 50cc pumps front and rear. Any opinions?
07-19-2008, 04:36 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Is that a Dominator with a choke?
07-19-2008, 04:44 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
on Holley's website they have a list that shows what jets come stock in each carb....I would find out what they had new and start there.
08-16-2008, 06:59 AM
Member
JUNIOR BUILDER
Join Date: Aug 2007
Location: Odessa Texas
Posts: 81
Never seen a dominator with a choke before :?
08-16-2008, 07:29 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Yea it was an old one! The choke was removed and I made 2 passes with it..it ran 1mph quicker than my old carb but seemed to get hot quick so I installed my little carb back on..before I started it up I pulled one of the plugs and it was dead lean looked as white as they came new...so 90 jets were too small!! I need a good dominator to try. 8)
08-16-2008, 04:59 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
My 1050 has 88's square :? it is the old 8896 before the HP series
08-17-2008, 07:32 AM
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
I'm running 92 square on my older 1050 dominator which is atop my 13 to 1 compression 496 BBC Runs great and pretty consistent but I think it's still alittle fat. Whats your timing at? Cp
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off