Results 1 to 2 of 2

Thread: need help

  1. #1
    Junior Member JOURNEYMAN
    Join Date
    Aug 2005

    need help

    does anybody know where the best place is to get an aluminum driveshaft for a 78 chevy camaro my stock piece didnt make it from what is left of it measures 45 1/2 inches long i could be wrong on that it is in 2 chunks any help would be cool the tube size is 2 and 3/4 can i go to 3 inch with no problems thanks

  2. #2
    Senior Member RACING JUNKIE fla1976's Avatar
    Join Date
    Aug 2007


    Look on EBay or a salvage yard for an aluminum driveshaft from a fullsize Ford. You can have a machine shop cut it to the correct length. It is a heavy duty shaft. You can get the u-joints at NAPA to adapt it to the Chevy driveline.

  3. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy