Results 1 to 7 of 7

Thread: JESEL SHAFT ROCKERS SBC

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Feb 2008
    Location
    New Jersey
    Posts
    133

    JESEL SHAFT ROCKERS SBC

    Im trying to decide on either jesel orTD shaft rockers on my sbc. Im not familiar much with TD but i know Jesel has great rep.. my past motors did not have a shaft system..but ive read up and it seems the way to go for reliability - valve geometry -and Hp.
    So if you have TD or jesel what are your opinions?

    thanks in advance
    Keith

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998

    Re: JESEL SHAFT ROCKERS SBC

    Quote Originally Posted by dynaguy03
    Im trying to decide on either jesel orTD shaft rockers on my sbc. Im not familiar much with TD but i know Jesel has great rep.. my past motors did not have a shaft system..but ive read up and it seems the way to go for reliability - valve geometry -and Hp.
    So if you have TD or jesel what are your opinions?

    thanks in advance
    Keith
    Cant go wrong with either IMO
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  3. #3
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295
    Cant go wrong with either IMO
    i agree.

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Feb 2008
    Location
    New Jersey
    Posts
    133
    thanks
    Jesel it is... the are local for me.. i prefer to deal locally

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    May 2003
    Location
    Owingsville, Ky
    Posts
    157
    I would make sure that the Jesel's have the single piece shafts and not the 3-piece cheaper version. The Sportsman version for a BBC that I purchased in a trade had the 3-piece which break before bending a push rod. At the time, I thought that all Jesel's were equal. NOT!

    Later,
    Bill M

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by sp2816
    I would make sure that the Jesel's have the single piece shafts and not the 3-piece cheaper version. The Sportsman version for a BBC that I purchased in a trade had the 3-piece which break before bending a push rod. At the time, I thought that all Jesel's were equal. NOT!

    Later,
    Bill M
    Jesel does make 3 different styles I've ran all 3 with no issues but as long as you can wing it get the pro series.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    Don't know about Jesel but I'm pretty sure T&D has spring oilers which is nice.

    could be wrong.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy