4 LINK BARS

Old 06-15-2008, 02:11 PM
  #1  
RAPPTOR23
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Sep 2007
Posts: 45
Default 4 LINK BARS

WHAT IS A GOOD LENGTH FOR 4 LINK BARS>> CE :wink: NTER TO CENTER.. 2300 LBS CAR. 108 WB ..BBC, 680 HP.. 32/14 TIRE, POWERGLIDE. 4.11 GEAR. RD
RAPPTOR23 is offline  
Old 06-15-2008, 04:02 PM
  #2  
promod45
Member
JUNIOR BUILDER
 
Join Date: Aug 2004
Posts: 96
Default bars

it depends on whos 4 link you have, they all have different lengths for there brackets, so i would find out whos brackets you have and then you will no,
promod45 is offline  
Old 06-16-2008, 02:52 AM
  #3  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

Longer bars the changes are not as brutal.
Shorter bars the changes get very brutal.

Averages usually run 20 inches to 22 inches center to center. I have seen 28 inches. I have seen much shorter in lower powered cars.

If you are using pre-made brackets by all means use the same maker for front and rear brackets. Find from them how long of bars those brackets are designed for. Also question them heavily about you getting the rear and front brackets lined up up and down, like the brackets were designed.

Ed
edvancedengines is offline  
Old 06-20-2008, 02:03 PM
  #4  
RAPPTOR23
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Sep 2007
Posts: 45
Default BARS

THANKS FOR HELP. MINE ARE COMP.ENG. 23 INCHES CENTER TO CENTER :wink:
RAPPTOR23 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -