Mark Williams Axles???????

Old 06-14-2008, 08:46 PM
  #1  
jrthone
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
Default Mark Williams Axles???????

Im buying a new set of 35 spline axles for my Nine inch.Im up around the 1200hp mark in a 632BBC with a 2700Lbs car.Im thinking about Mark williams but also Strange are on the back of my mind. Are Mark Williams hi-torque axles really worth the extra $200usd over the Strange Hy-tuff axles.Let me know what you guys think????????
jrthone is offline  
Old 06-14-2008, 10:09 PM
  #2  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

Nothing compares to Mark Williams. Warning - M/W Splines are different than anyone elses, so you must use MW Spool.

Buy it once. Buy MW.

If you already have spool Strange and Moser will interchange.

Ed
edvancedengines is offline  
Old 06-14-2008, 10:22 PM
  #3  
jrthone
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
Default

I already have a Strange center section ( Alloy Strange 3.250 casing 4.88 Strange pro gears and Strange pro race spool and Strange alloy pinion support). Will Mark williams custom make to suit???
jrthone is offline  
Old 06-15-2008, 07:27 AM
  #4  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Default

Mark Williams uses 45deg pressure angle on the splines, Strange is 30deg angle. MW will put the spline you need on the axles but you need to specify which.
curtisreed is offline  
Old 06-15-2008, 03:13 PM
  #5  
jrthone
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
Default

Thats allright then i told them i was using a Strange spool and gave them a part number. It should be allright hopfully
jrthone is offline  
Old 06-16-2008, 04:43 AM
  #6  
signsbyesa
Senior Member
RACING JUNKIE
 
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
Default

when you call strange, let them know the horse pwr your running,
their axels can take it, i have notice that there are 2 kinds of rears
that the pro-stock run and most run Mark Williams and then the
rest use Strange, have not seen moser or anyother style of
axels for that much torque. Warren johnnson uses Strange,
greg anderson uses MK, i think you'll be ok with strange :wink:
signsbyesa is offline  
Old 06-17-2008, 01:08 PM
  #7  
jmech
Member
JOURNEYMAN
 
Join Date: May 2004
Location: Letellier MB, Canada
Posts: 31
Default

I have a set of 35 spline MW axles that are twisted big time. Came out of a manual shift 9 second car with a Dana rear. I replaced them with Strange axles.
jmech is offline  
Old 06-17-2008, 03:03 PM
  #8  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

Strange all the way!!!!!!!!!!!!!!!!!
kwkracing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -