Results 1 to 8 of 8

Thread: Mark Williams Axles???????

  1. #1
    Senior Member SENIOR BUILDER
    Join Date
    Oct 2005
    Location
    Wellington , New Zealand
    Posts
    122

    Mark Williams Axles???????

    Im buying a new set of 35 spline axles for my Nine inch.Im up around the 1200hp mark in a 632BBC with a 2700Lbs car.Im thinking about Mark williams but also Strange are on the back of my mind. Are Mark Williams hi-torque axles really worth the extra $200usd over the Strange Hy-tuff axles.Let me know what you guys think????????
    "The only thing better than Cubic inches is more of them"


    GO THE ALL BLACKS!!!!!!!!

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    Location
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    Posts
    540
    Nothing compares to Mark Williams. Warning - M/W Splines are different than anyone elses, so you must use MW Spool.

    Buy it once. Buy MW.

    If you already have spool Strange and Moser will interchange.

    Ed
    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.

  3. #3
    Senior Member SENIOR BUILDER
    Join Date
    Oct 2005
    Location
    Wellington , New Zealand
    Posts
    122
    I already have a Strange center section ( Alloy Strange 3.250 casing 4.88 Strange pro gears and Strange pro race spool and Strange alloy pinion support). Will Mark williams custom make to suit???
    "The only thing better than Cubic inches is more of them"


    GO THE ALL BLACKS!!!!!!!!

  4. #4
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    Mark Williams uses 45deg pressure angle on the splines, Strange is 30deg angle. MW will put the spline you need on the axles but you need to specify which.

  5. #5
    Senior Member SENIOR BUILDER
    Join Date
    Oct 2005
    Location
    Wellington , New Zealand
    Posts
    122
    Thats allright then i told them i was using a Strange spool and gave them a part number. It should be allright hopfully
    "The only thing better than Cubic inches is more of them"


    GO THE ALL BLACKS!!!!!!!!

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    when you call strange, let them know the horse pwr your running,
    their axels can take it, i have notice that there are 2 kinds of rears
    that the pro-stock run and most run Mark Williams and then the
    rest use Strange, have not seen moser or anyother style of
    axels for that much torque. Warren johnnson uses Strange,
    greg anderson uses MK, i think you'll be ok with strange :wink:

  7. #7
    Member JOURNEYMAN
    Join Date
    May 2004
    Location
    Letellier MB, Canada
    Posts
    31
    I have a set of 35 spline MW axles that are twisted big time. Came out of a manual shift 9 second car with a Dana rear. I replaced them with Strange axles.

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Dec 2004
    Location
    austin texas
    Posts
    729
    Strange all the way!!!!!!!!!!!!!!!!!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy