crankshaft identification
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Jan 2008
Posts: 1,230
crankshaft identification
As much as I hate to appear to be a retard, :? I am going to have to. I have limited information for big block id purposes. I have always been a sbc guy, ready for more cubic inches! I am trying to id the crankshaft I have in one of my motors, any help would be appreciated! The crank is for a big block.
Cast # 3856223 it has Z J K just above it, this was found on rear fillet.
S7 X 6 + was on the front fillet.
I will try to add picture.
Thanks,
Rudy
Cast # 3856223 it has Z J K just above it, this was found on rear fillet.
S7 X 6 + was on the front fillet.
I will try to add picture.
Thanks,
Rudy
#2
Senior Member
EXPERT BUILDER
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
check this out...
3856223 396 65-66 Forged Steel ALL -
3856223 396 67-69 Forged Steel Chevelle, Camaro Hi Perf.
3856223 402 70-71 Forged Steel - -
http://www.backyardautomotive.com/ch...t_casting.html
Or Here...
http://www.mortec.com/cranks.htm
BBC TWO PIECE REAR MAIN OIL SEALS
3.76" STROKE used on '65-'90 Mark IV 366T, 396, 402, 427 or 427T
3856223....396...forged
3856223 396 65-66 Forged Steel ALL -
3856223 396 67-69 Forged Steel Chevelle, Camaro Hi Perf.
3856223 402 70-71 Forged Steel - -
http://www.backyardautomotive.com/ch...t_casting.html
Or Here...
http://www.mortec.com/cranks.htm
BBC TWO PIECE REAR MAIN OIL SEALS
3.76" STROKE used on '65-'90 Mark IV 366T, 396, 402, 427 or 427T
3856223....396...forged