please help its getting costly
06-04-2008, 08:35 AM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2005
Posts: 29
please help its getting costly
this is the problem i keep have happening breaking transmission this is the second time the motor has solid mounts and trans a polyurethane mount just had driveshaft balanced and its good any help would be great i can only afford to do 1 more trans if it breaks i am done racing for the year
the car is a 78 camaro i also had an 8 point cage put in what else needs to be done i am lost on this thanks for your input on this :?
06-04-2008, 10:07 AM
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
need more info what are you breaking on or in the trans ,is your frame tied, are your front frame mounts good,are you using same gearset,any viberating before,what kind of trans. what gearset.
john
06-04-2008, 10:21 AM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2005
Posts: 29
we are breaking the trans case right before the pump frame is tied and a 456 gear
06-04-2008, 10:22 AM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2005
Posts: 29
turbo 350 we have had no problems with this until we put in the new motor its a 388 chevy
06-04-2008, 10:27 AM
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
cause you are breaking cases i would check your sub-frame mounts in the front of the car ,you might have to go to solid frame mounts in to stop the front of the car from flexing.good luck
06-04-2008, 11:30 AM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2005
Posts: 29
thanks john we were thinking about doing that thanks again
06-04-2008, 01:29 PM
Junior Member
APPRENTICE
Join Date: Nov 2005
Posts: 16
IMO, Front Motor Plate, Mid Plate, Lateral Engine Travel Limiters!
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off