Who makes a good egt recorder?What do you use?
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Who makes a good egt recorder?What do you use?
My friend wants one for his FED.We are on a tight budget.That is not to say we won't spend the money,we just don't have it Just wandered what ya'll used,liked,hated.....Thanks
#5
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
#9
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Don't see why it wouldn't, but you should check your local rules.
Usually the only things illegal are automated enhancements. The logger just gives you data. What you do with the data from there is up to you.
Usually the only things illegal are automated enhancements. The logger just gives you data. What you do with the data from there is up to you.
#10
Senior Member
MASTER BUILDER
Join Date: Mar 2003
Posts: 127
I use a 2 channel meter...simular to the computec one.. I thnk Fluke make one simular to the one 1 have ...The nice thing about it is that it has a min and max button on it...I do the burnout and press the min max button... then make the pass.... on the return road I hit the max button and check both probes.. We run a BBC and I have a probe in both the short and long runner...When we 1st started running I would move the probes to different cyl. on a test day just to see if I had a cylinder that ran leaner or richer than the rest...I think If I was to do it again I would look at the Racedata datta Logger/Dash. Their unit is identical to the Comuptec unit (I think they get them from the same place) so I could see all 8 cylinders and some other settings