Results 1 to 6 of 6

Thread: Cold fusion nitrose jets

  1. #1

    Cold fusion nitrose jets

    I bought a car with a setup allready on, Are these jets the same as NOS? thanks

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Nov 2007
    Location
    Wisconsin cheesehead!!
    Posts
    213
    a flare jet is a flare jet, not much difference exept some are stainless steel, and the other cheaper ones are brass.
    1987 Pontiac Fiero GT
    418ci SBC v8, manual 5-speed.
    dual stage nitrous injected

  3. #3
    Senior Member RACING JUNKIE mytmouz's Avatar
    Join Date
    May 2006
    Location
    Pelahatchie, MS
    Posts
    983
    er, not exactly. The degree of flare is different and not all jets are interchangeable as a result.
    If you think nobody cares, try missing a payment...

  4. #4
    Senior Member RACING JUNKIE mytmouz's Avatar
    Join Date
    May 2006
    Location
    Pelahatchie, MS
    Posts
    983
    If you think nobody cares, try missing a payment...

  5. #5
    Member JUNIOR BUILDER
    Join Date
    Jun 2004
    Location
    lake luzerne n.y.
    Posts
    87
    Quote Originally Posted by v8Fiero
    a flare jet is a flare jet, not much difference exept some are stainless steel, and the other cheaper ones are brass.
    Not true at all. Most jets that are out there are made in different ways. Some drilled some cnc'ed, and some are flowed after they are made. The brass jets are the most inconsistent jets you can buy( I only know of one company that makes excellent brass jets, not well known). Stainless steel are becoming the norm and most are cnc'ed so you do end up with more consistant jetting which is necessary with a fogger system. The flowed jets are the best for getting the most consistant cylinder to cylinder equalization of nitrous and fuel with a fogger system. The flowed jets are really designed for the guy running on the edge of a tune.

  6. #6
    I had bought som stainelss steel nos jets to replace the brass & they look a little different on the base , like they have a litlle bevel where it meets the stem, the brass jet looks like a mushroom, the bas to the stem looks is a 90 degree angle, where the Stainless one tapers a little, if it fits is it ok?
    Thanks for the replys


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy