what heads to run
04-26-2008, 07:57 PM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Jan 2008
Posts: 28
what heads to run
i have a 383 stroker chevy.with iron heads 202 & 1.60,292 501 cam,flat tops,650 pumper,what is a good alum. head to run on street i found a set of holley heads ready to bolt on $1000 is that good deal new at local shop
04-26-2008, 08:30 PM
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Florida
Posts: 635
Dart has one of the best castings as far a quality. Any reason for aluminum? Iron makes more power all else being equal. What do you expect, and will you run street only or race any?
04-28-2008, 10:44 PM
Junior Member
SHOW GUEST
Join Date: Sep 2006
Posts: 9
I got Brodix RR180 on my 383. My motor made 428hp, 460lbs with a small hydraulic roller cam, 10.5-1. RPM air gap, and a 750dp. AFR or Brodix i would stick with. The new AFR 195 is a really good head for street.
04-29-2008, 05:51 PM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Jan 2008
Posts: 28
iam looking at some brodix trach 1 heads and maybe a set of bare 292 casting iron head
04-30-2008, 06:29 PM
Senior Member
SENIOR BUILDER
Join Date: Oct 2004
Location: Woodbridge, VA
Posts: 101
I'd start with the Brodix Track 1 or the Dart pro 1, .. anything else
will be a step down.
I wouldn't use Holly heads for a boat anchor, ..
Curtis
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
